BELÉPÉS
Termékek
Akkumulátor mérők
Alkatrészmérők
Audio-Video-CD/DVD
Dekádok
Elektronikus terhelések
Életvédelmi műszerek
Feszültség teszter
Frekvenciamérők
Generátorok
Hőmérsékletmérők
Kalibrátorok
Lakatfogók
Mérésadatgyűjtők
Multiméterek
Oktatási eszközök
Optikai mérőeszközök
Optikai szerelések
Oszcilloszkópok
Regisztrálók
Spektrum analizátor
Solar system
Szigetelés vizsgálók
Színmérés, színanalizálás
Tápegységek
Telekommunikációs mérőeszközök
Teljesítménymérők, analizátorok
TV mérőműszerek
DC-15MHz DIFFERENTIAL PROBE, TYPE: 700925

  • Input attenuation ratio: switch between 1/10, 1/100
  • Maximum allowed differential voltage: ±500V (DC+ACpeak) or 350 Vrms (1/100)
  • Maximum common mode input voltage: ±500V (DC+ACpeak) or 350 Vrms (1/10, 1/100)

 

Katalógus letöltés (pdf)

 
DC-50MHz HIGH VOLTAGE DIFFERENTIAL PROBE, TYPE: 701926

 

The 701926 is a 1000:1 or 100:1 high voltage (7kV peak) probe with bandwidth from DC to 50MHz, This probe provides a balanced differential input, to be used with oscilloscopes with single-ended inputs. It can operate using battery power or the probe power ports available in all Yokogawa oscilloscopes

 

Katalógus letöltés (pdf)

 
DC-100MHz DIFFERENTIAL PROBE, TYPE: 700924

 

The 700924 differential probe is a differential probe with a bandwidth of 100MHz and a 100:1 or 1000:1 attenuation ratio.

 

Katalógus letöltés (pdf)

 

 
DC-100MHz DIFFERENTIAL PROBE, TYPE: 701921

  • Bandwidth: DC to 100 MHz (-3 dB)
  • Input attenuation ratio: switch between 1/10 and 1/100
  • Maximum allowed differential voltage: ±700 V (DC+ACpeak, 1/100)
  • Maximum common mode input voltage: ±700 V (DC+ACpeak) (1/10, 1/100)

 

Katalógus letöltés (pdf)

 
DC-200MHz DIFFERENTIAL PROBE, TYPE: 701922

  • Bandwidth: DC to 200 MHz (-3 dB)
  • Input attenuation ratio: 1/10 (fixed)
  • Maximum allowed differential voltage: ±20 V (DC+ACpeak)
  • Maximum common mode input voltage: ±60 V (DC+ACpeak)
  • 50 Ω output

 

 Katalógus letöltés (pdf)

 
DC-500MHz DIFFERENTIAL PROBE, TYPE: 701920

Signals are getting faster, power supply voltages are getting lower, and the use of noise-resistant differential signals that can precisely transmit other signals is increasing. However oscilloscope input is usually single-end, so in order to observe these differential signals it is necessary to input two separate signals and perform calculations on them. Also with most oscilloscopes, you cannot activate a trigger using the calculated signals so one of the differential signals must be used. Using our differential probe, you can observe a 500 MHz bandwidth differential signal even with a single-end input oscilloscope

 

Katalógus letöltés (pdf)

 
DC-1.0GHz DIFFERENTIAL PROBE (PBDH1000), TYPE: 701924

 

This probe can be used in combination with the DL-9000, DL-6000, DL-2000 or SB-5000 series.

 

  • Bandwidth: DC to 1.0 GHz (-3 dB)
  • Input Resistance: 1 MΩ (against GND level from each input terminal)
  • Input Capacitance: approx. 1.1 pF (against GND level from each input terminal)
  • Max. operational input voltage: ±35 V
  • Max. differential input voltage: ±25 V
  • Attenuation: 1/50
  • Compatible probe with the FlexRay test standard
  • Hhigh-speed differential probe which has enough voltage range
  • High input impedance
  • Robust accessories for the in-vehicle test environment

Katalógus letöltés (pdf)

 

 
2.0 GHz DIFFERENTIAL PROBE (PBD2000), TYPE: 701923

 

This probe can be used in combination with the DL-9000, DL-6000 or SB-5000 series

  • Bandwidth: DC to 2.0 GHz (-3 dB)
  • Input Resistance: 50 kΩ (against GND level from each input terminal)
  • Input Capacitance: approx. 1.1 pF (against GND level from each input terminal)
  • Max. operational input voltage: ±7 V
  • Max. differential input voltage: ±5 V
  • Attenuation: 1/10

Katalógus letöltés (pdf)